Watch this product and we will notify you once it is back in stock.
Reef Motion DC
The most reliable aquarium pump.
Reef Motion 1.5KDC
Max. Flow:1800 l/h Height: 3,5 m (11,5 ft) Power:18w Power supply: 24v 1A Outlet pipe:16/20 mm Outlet thread: 1" Inlet pipe: 20 mm Inlet thread: 1" Dimensions: 93x62x107 mm
Reef Motion 1.5KDC
Reef Motion 2.3KDC
Reef Motion 4KDC
Reef Motion 8KDC
Reef Motion 12KDC
Complete range of fittings and accessories
Reef Motion DC pumps come with all the necessary fittings to install the pump in your system, fixed PVC pipes or hose connectors. Inlet and outlet have standard thread.
Reef Motion DC Controller
Compact multifunctional controller
It allows you to have an accurate reading of the power of the pump and the internal clock time. It informs you of any problem in the pump with alarms message, and it let you program the pump.
Programmable feeding times
The internal clock allows you to program up to 3 feeding times ( 5 minutes at 30% power). Also very functional in protein skimmers as it allows programming a stop in feeding times or addition of elements
2 Independent level sensor ports and 1 computer port
You can connect up to 2 level sensors to prevent water overflow or dry operation in your aquarium or in your protein skimmer. You can control the pump with an aquarist computer by computer port with a 1/10 vol signal.
If there is a problem, an alarm message will appear on the display showing the type of problem.
The safest water pump
Reef Motion water pumps incorporate the latest security systems to protect your system and themselves
After a pause due to the detection of an error, the pump will restart 5 times to try to solve the problem, if it can not get, it will stop. This protocol prevents the pump motor burn, but if the problem has been solved in these 5 attempts the pump will work again avoiding the aquarium to run out of flow.
Dry operation sensor
If the pump detects that it is working dry, it will follow the self-protection protocol.
Incorrect operation sensor
The pump also detects the presence of a foreign body in the pump that could damage the rotor or if there is a problem in aligning the rotor shaft or the bearings.
If the pump detects that there is an abnormal consumption and overheating, the self-protection protocol will be activated.